Aquasure - FD Repair Adhesive - 28g

The Gear Aid Aquasure FD Repair Adhesive is a high-quality, transparent, and fully waterproof repair glue designed to fix damaged outdoor and fishing gear. This powerful urethane adhesive is specially formulated for materials that frequently move, bend, and are exposed to water. Once fully cured, Aquasure FD forms a strong, flexible, rubber-like bond that offers excellent protection against wear and moisture.

For carp anglers, the Gear Aid Aquasure FD is particularly useful for repairing waders, neoprene products, waterproof clothing, and other gear. Small tears, holes, and damaged seams don’t have to mean the end of your equipment. With Aquasure FD, you can sustainably fix many damages and extend the lifespan of your gear.

Features of Gear Aid Aquasure FD Repair Adhesive

• Transparent and waterproof repair adhesive
• Based on thermoset urethane
• Cures to a strong, flexible, rubber-like bond
• Excellent abrasion resistance
• Developed for durable repairs
• Suitable for tears, holes, and damaged seams
• Remains flexible on moving and bending materials
• Adheres to neoprene, rubber, nylon, canvas, and vinyl
• Ideal for waders, wetsuits, and various outdoor products
• Also usable as a waterproof seam sealer
• Transparent finish after curing
• Normal curing time of about 8 to 12 hours
• Curing time can be shortened to about 2 hours with a separate Cure Accelerator
• Available in a practical 28-gram tube

Waterproof repairs for your fishing gear

A damaged wader or a leaking seam can be very frustrating while fishing. Especially when you frequently enter the water to net a fish, set a rig, or fish from a tricky spot, you want to rely on your gear.

Aquasure FD is designed to waterproof repairs on tears, holes, and damaged joints. After full curing, it creates a durable seal that prevents water from entering through the repaired area.

This makes the adhesive a practical solution for carp anglers who want to repair their waders or other waterproof gear themselves.

Flexible urethane glue that moves with your gear

The main difference between Aquasure FD and many traditional adhesives is its flexibility after curing. Where hard glue bonds can crack when the material bends, Aquasure FD forms a rubber-like bond that moves with the material.

This is especially important for neoprene, rubber, and other flexible materials. Think of a wader that constantly moves as you walk, kneel, or step into the water.

Therefore, the glue is suitable for repairs where a combination of waterproofing, flexibility, and durability is essential.

Excellent abrasion resistance

Besides its flexible properties, Aquasure FD offers high resistance to wear. The cured urethane bond is designed to withstand rubbing and frequent use.

This is particularly relevant for gear that often comes into contact with rough surfaces, such as waders, neoprene clothing, and other products heavily used during outdoor activities.

Suitable for various materials

Gear Aid Aquasure FD has broad applicability and can be applied to several commonly used materials.

• Neoprene
• Rubber
• Nylon
• Canvas
• Vinyl

This makes Aquasure FD not only suitable for waders and wetsuits but also for various other outdoor products containing these materials.

Ideal for repairing waders

For carp anglers, waders are one of the main applications for Aquasure FD. Use can cause small holes, tears, or leaks at seams. With this repair adhesive, you can target these damages effectively.

The glue can be used to seal a damaged spot or reseal a leaking seam. After curing, the bond remains flexible, allowing it to follow the movements of the wader.

Also suitable as a seam sealer

Besides being a repair adhesive, Aquasure FD can also be used as a seam sealer. This allows damaged or leaking seams of suitable materials to be made waterproof again.

When treating a seam, it’s important to spread the glue evenly over the damaged area and allow sufficient time for full curing.

Transparent finish

Aquasure FD dries clear, keeping the repaired spot relatively inconspicuous depending on the underlying material and the amount of glue applied.

This is convenient when you want to fix a small damage without leaving a noticeable colored glue line.

Curing time of 8 to 12 hours

The normal curing time for Gear Aid Aquasure FD is about 8 to 12 hours. During this period, the repair should be left undisturbed so the glue can fully cure and form the final waterproof, flexible bond.

Only use the repaired gear again once the glue is completely cured. Exact curing time may vary depending on conditions and the amount of glue applied.

Faster curing with Cure Accelerator

If you want to shorten the repair time, Aquasure FD can be combined with a suitable Gear Aid Cure Accelerator. According to the manufacturer, this can reduce curing time to about 2 hours.

The Cure Accelerator is a separate product and is not included with the Aquasure FD tube.

How to use Gear Aid Aquasure FD?

Good preparation is key for a durable repair. Make sure the surface where you apply the glue is clean and dry, free from dirt, oil, and other contaminants.

• Inspect the damage and determine the area to be repaired.
• Clean the surface thoroughly and let it dry completely.
• Apply an even layer of Aquasure FD over the damaged area.
• Extend the glue slightly beyond the edges of the damage.
• Place the gear so the repair is not stressed during curing.
• Allow the glue to cure fully for 8 to 12 hours under normal conditions.
• Check the repair before using the gear again.

Always follow the usage and safety instructions on the Gear Aid packaging.

Storage advice

Gear Aid recommends storing Aquasure FD in a sealed bag in the freezer. This slows down the curing process of the remaining glue and keeps the contents usable for longer.

Make sure to close the tube tightly after use and follow the manufacturer’s storage instructions.

Product benefits

• Enables durable and waterproof repairs
• Ideal for damaged waders and neoprene products
• Remains flexible after curing
• Excellent resistance to abrasion and wear
• Suitable for various materials
• Also usable for sealing seams
• Transparent finish
• Helps extend the lifespan of outdoor and fishing gear
• Normal curing within about 8 to 12 hours
• Faster curing possible with a separate Cure Accelerator
• Practical tube for targeted repairs

Specifications

• Brand: Gear Aid
• Product: Aquasure FD Repair Adhesive
• Product type: Waterproof repair adhesive
• Material: Thermoset urethane
• Color: Transparent
• Tube content: 28 grams
• Finish: Flexible and rubber-like
• Waterproof after curing: Yes
• Abrasion resistant: Yes
• Suitable materials: Neoprene, rubber, nylon, canvas, and vinyl
• Normal curing time: 8 to 12 hours
• Curing with Cure Accelerator: About 2 hours
• Application temperature according to manufacturer: 60 to 100°F
• Relative humidity during application: Above 40%
• Use temperature after curing: -20 to 180°F
• Storage advice: In a sealed bag in the freezer

Important to know

Aquasure FD is a durable repair adhesive, not an instant-setting emergency glue. Allow a normal curing time of 8 to 12 hours before using the repaired gear again. For faster curing, a suitable Cure Accelerator is required.

The glue is developed for suitable flexible materials and waterproof repairs. Always check the suitability for specialist materials beforehand and follow the safety instructions on the packaging. This way, you can responsibly repair your valuable fishing gear and keep using it longer.